top of page
Search

How to Measure a Caravan Seat Cushion for Replacement Foam

Nov 11
2 min read

Caravan seating often looks rectangular until you lift the cushion. The bench may narrow at one end, curve around a corner or have several separate pads. A useful quotation starts with measurements for each foam insert, not just the overall length of the seating area.

Measure each cushion separately

For every piece, record length from left to right, depth from back to front and the thickness of the insert. Use centimetres throughout and write the three figures in the same order, such as 120 x 45 x 8 cm. Add the quantity. If two cushions look alike, measure both rather than assuming they match.

If you are reusing a removable cover, lay it flat without stretching it and measure the main panels. Measure its side border to check the intended thickness. Compare those figures with the seat base. Old foam can be compressed or misshapen, so it may not be a reliable template by itself.

Check the shape, not just the largest size

Measure the front and back lengths if a cushion tapers. Check the depth at both ends. Mark any diagonal corners, rounded edges, notches or gaps around furniture on a simple top-down sketch. A maximum length and depth alone do not describe an irregular insert. Label the sketch with which edge faces the front of the caravan.

If a seat lifts for storage, check that the cushion thickness and any projecting edge still allow the lid to open. Where two cushions meet, note whether they have separate covers and whether the join is straight or angled.

List all pieces and quantities

A clear request might say: seat base A, 120 x 45 x 8 cm, quantity 2; seat base B, tapered, 70 cm at the front and 66 cm at the back, 45 cm deep, 8 cm thick, quantity 1, with a sketch. Keep backrest cushions separate from seat bases. Backrests can have different thicknesses or slopes, so do not copy the seat measurements across.

Choose the foam for the job

Tell us whether the insert is for a seat base, backrest or occasional sleeping area, and whether you want to reuse an existing cover. Firmness is a matter of comfort and use; the dimensions alone cannot tell us which feel you prefer. If you are unsure, describe the current cushion and the change you want, such as more support or a softer feel. We supply cut foam inserts, not sewn fabric covers.

Before you request a quote

Send the length, depth, thickness and quantity for every piece. Add a labelled sketch and clear photograph for unusual shapes. Check that all measurements use the same unit. For straightforward rectangular inserts, you can enter each size into the instant quote tool. For tapered or cut-out pieces, ask for the shape to be reviewed before ordering.

Read more about our replacement cushion foam, or use the


Right Foam instant quote tool for simple rectangular pieces.

 
 
 

Comments


bottom of page